Necking Machine MEC 24/120 T (GUZZI GR65 - evo)

Overwiev: High speed machine for aluminium aerosol monobloc cans. It is possible to work several shoulder with standardized opening valve one inch or threaded.
Specifications:
- Diameter range: 35 to 66 mm
- Trimmed lenght: 100 to 300 mm
- Cans for minute: 120
- Rotating table Stations: 24
Download Technical Features and specifications
Specifications:
- Diameter range: 35 to 66 mm
- Trimmed lenght: 100 to 300 mm
- Cans for minute: 120
- Rotating table Stations: 24
Download Technical Features and specifications
Necking Machine MEC 24/120 (GUZZI GR65)

Overwiev:
High speed machine for aluminium aerosol monobloc cans.
It is possible to work several shoulder with standardized opening valve
one inch or threaded.
Specifications:
- Diameter range: 35 to 66 mm
- Trimmed lenght: 100 to 300 mm
- Cans for minute: 100
Specifications:
- Diameter range: 35 to 66 mm
- Trimmed lenght: 100 to 300 mm
- Cans for minute: 100
Necking Machine MEC 14/120 (GUZZI GR53 evo)

GUZZI GR53
Overwiev: High speed machine for aluminium aerosol monobloc cans. It is possible to work several shoulder with standardized opening valve one inch or threaded. On this machine it's possible to work aluminium rigid tubes for cigars and felt tip too.
Specifications:
- Diameter range: 15 to 45 mm
- Trimmed lenght: 60 to 200 mm
- Cans for minute: 100
Specifications:
- Diameter range: 15 to 45 mm
- Trimmed lenght: 60 to 200 mm
- Cans for minute: 100
Set of parts for GUZZI Necking machine to replace Brake-Clutch from electro-magnetic to pneumatic

Complete unit of pneumatic brake-clutch, ready to a self-made
assembly on the machine, to substitute the old electro-magnetic type, and to
have a best possibility to run the machine.
With this modification you can increase the speed of the machine.
With this modification you can increase the speed of the machine.
Set of parts for GUZZI Necking machine to increase the dies carrier stroke

Complete unit , ready to a self-made assembly on the machine, in
order to have the possibility to increase the dies carrier stroke and so
realize a can with an extended shape.
The set of parts allows to modify the total stroke up to 150 mm: Utilized stroke 76 mm-Loosed stroke74 mm
The set of parts allows to modify the total stroke up to 150 mm: Utilized stroke 76 mm-Loosed stroke74 mm